- 85 664 75 34
- handel@darmet.com.pl
- Darmet sp. z o.o.
Zakład Obróbki Skrawaniem
ul. Komunalna 4c, 15-197 Białystok
Our adress:
Darmet sp. z o.o.
Zakład Obróbki Skrawaniem
Komunalna 4c street, 15-197 Białystok
Our e-mail:
handel@darmet.com.pl
Telephone number:
+48 85 664 75 34
Tap collets ER-MRF, sealed
Technical data:
TYPE ER-MRF, sealed | |||||||||||
|
|||||||||||
ER | M | D | SW | Code | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
32 | 4 | 4,5 | 3,4 | ER32MRF.D4,5 | |||||||
32 | 4 | 5 | 4 | ER32MRF.D05 | |||||||
32 | 5 | 5,5 | 4,3 | ER32MRF.D5,5 | |||||||
32 | 5-6-8 | 6 | 4,9 | ER32MRF.D06 | |||||||
32 | 7-10 | 7 | 5,5 | ER32MRF.D07 | |||||||
32 | 8 | 8 | 6,2 | ER32MRF.D08 | |||||||
32 | 9-12 | 9 | 7 | ER32MRF.D09 | |||||||
32 | 10 | 10 | 8 | ER32MRF.D10 | |||||||
32 | 14 | 11 | 9 | ER32MRF.D11 | |||||||
32 | 16 | 12 | 9 | ER32MRF.D12 | |||||||
32 | 18 | 14 | 11 | ER32MRF.D14 | |||||||
32 | 20 | 16 | 12 | ER32MRF.D16 |
STANDARDS ER | |||||||||||||||||||||||||
PARAMETERS | ER 11 | ER 16 |
ER 20 |
ER 25 |
ER 32 |
ER 40 | |||||||||||||||||||
d1 | 1÷ 7 | 1÷ 10 | 1÷ 13 | 1÷ 16 | 2÷ 20 | 3÷30 | |||||||||||||||||||
CLAMPING RANGE |
0,5 mm | 0,5÷ 1 mm | 0,5÷ 1 mm | 0,5÷ 1 mm | 0,5÷ 1 mm | 1 mm | |||||||||||||||||||
d2 | 11 | 16 | 20 | 25 | 32 | 40 | |||||||||||||||||||
d3 | 11,5 | 17,0 | 21,0 | 26,0 | 33,0 | 41,0 | |||||||||||||||||||
a AT3 | 8° | 8° | 8° | 8° | 8° | 8° | |||||||||||||||||||
l1 | 18,0 | 27,5 | 31,5 | 34,0 | 40,0 | 46,0 | |||||||||||||||||||
l13 max | 6,6 | 10,6 | 11,5 | 12 | 13 | 15 |
Mounting collets in screw-on caps:
Mounting the collet in the cap |
Properly mounted collet | Unmounting of the collet |
For proper mounting of ER collet follow these steps:
- Put the collet into the cap at slight angle
- Hook the groove of the collet on eccentric or cylindrical edge of the collet (fig. A)
- Jam the collet into the cap (fig. B)
- Screw the cap with collet on the toolholder, so that mounting of the machined tool is possible
Max mounting diameters in regard to ER collet size:
Collets EO
Technical data:
TYPE EO
EO d D L Code
16
3,0-2,5
25,50
40
E016.D03
16
4,0-3,5
25,50
40
E016.D04
16
5,0-4,5
25,50
40
E016.D05
16
6,0-5,5
25,50
40
E016.D06
16
7,0-6,5
25,50
40
E016.D07
16
8,0-7,5
25,50
40
E016.D08
16
9,0-8,5
25,50
40
E016.D09
16
10,0-9,5
25,50
40
E016.D10
16
11,0-5-10,5
25,50
40
E016.D11
16
12,0-5-11,5
25,50
40
E016.D12
16
13,0-12,5
25,50
40
E016.D13
16
14,0-13,5
25,50
40
E016.D14
16
15,0-14,5
25,50
40
E016.D15
16
16,0-15,5
25,50
40
E016.D16
STANDARDS EO | |||||||||||||||||||||||||
EO | d1 min-max |
Clamping range |
d2 |
d3 | l1 |
l17 max |
|||||||||||||||||||
16B | 2÷ 16 | 0,5 mm | 22,65 | 25,5 | 40 | 15 |
Rubber sealed collet ER-RF for coolant through tools, ER-RF
Technical data:
TYPE ER-RF |
|||||||||||
ER | d | d3 | l1 | Code | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
25 | 3 | 26 | 34 | ER25RF.D03 | |||||||
25 | 4 | 26 | 34 | ER25RF.D04 | |||||||
25 | 5 | 26 | 34 | ER25RF.D05 | |||||||
25 | 6 | 26 | 34 | ER25RF.D06 | |||||||
25 | 7 | 26 | 34 | ER25RF.D07 | |||||||
25 | 8 | 26 | 34 | ER25RF.D08 | |||||||
25 | 9 | 26 | 34 | ER25RF.D09 | |||||||
25 | 10 | 26 | 34 | ER25RF.D10 | |||||||
25 | 11 | 26 | 34 | ER25RF.D11 | |||||||
25 | 12 | 26 | 34 | ER25RF.D12 | |||||||
25 | 13 | 26 | 34 | ER25RF.D13 | |||||||
25 | 14 | 26 | 34 | ER25RF.D14 | |||||||
25 | 15 | 26 | 34 | ER25RF.D15 | |||||||
25 | 16 | 26 | 34 | ER25RF.D16 | |||||||
32 | 3 | 33 | 40 | ER32RF.D03 | |||||||
32 | 4 | 33 | 40 | ER32RF.D04 | |||||||
32 | 5 | 33 | 40 | ER32RF.D05 | |||||||
32 | 6 | 33 | 40 | ER32RF.D06 | |||||||
32 | 7 | 33 | 40 | ER32RF.D07 | |||||||
32 | 8 | 33 | 40 | ER32RF.D08 | |||||||
32 | 9 | 33 | 40 | ER32RF.D09 | |||||||
32 | 10 | 33 | 40 | ER32RF.D10 | |||||||
32 | 11 | 33 | 40 | ER32RF.D11 | |||||||
32 | 12 | 33 | 40 | ER32RF.D12 | |||||||
32 | 13 | 33 | 40 | ER32RF.D13 | |||||||
32 | 14 | 33 | 40 | ER32RF.D14 | |||||||
32 | 15 | 33 | 40 | ER32RF.D15 | |||||||
32 | 16 | 33 | 40 | ER32RF.D16 | |||||||
32 | 17 | 33 | 40 | ER32RF.D17 | |||||||
32 | 18 | 33 | 40 | ER32RF.D18 | |||||||
32 | 19 | 33 | 40 | ER32RF.D19 | |||||||
32 | 20 | 33 | 40 | ER32RF.D20 | |||||||
40 | 4 | 41 | 46 | ER40RF.D04 | |||||||
40 | 5 | 41 | 46 | ER40RF.D05 | |||||||
40 | 6 | 41 | 46 | ER40RF.D06 | |||||||
40 | 7 | 41 | 46 | ER40RF.D07 | |||||||
40 | 8 | 41 | 46 | ER40RF.D08 | |||||||
40 | 9 | 41 | 46 | ER40RF.D09 | |||||||
40 | 10 | 41 | 46 | ER40RF.D10 | |||||||
40 | 11 | 41 | 46 | ER40RF.D11 | |||||||
40 | 12 | 41 | 46 | ER40RF.D12 | |||||||
40 | 13 | 41 | 46 | ER40RF.D13 | |||||||
40 | 14 | 41 | 46 | ER40RF.D14 | |||||||
40 | 15 | 41 | 46 | ER40RF.D15 | |||||||
40 | 16 | 41 | 46 | ER40RF.D16 | |||||||
40 | 17 | 41 | 46 | ER40RF.D17 | |||||||
40 | 18 | 41 | 46 | ER40RF.D18 | |||||||
40 | 19 | 41 | 46 | ER40RF.D19 | |||||||
40 | 20 | 41 | 46 | ER40RF.D20 | |||||||
40 | 21 | 41 | 46 | ER40RF.D21 | |||||||
40 | 22 | 41 | 46 | ER40RF.D22 | |||||||
40 | 23 | 41 | 46 | ER40RF.D23 | |||||||
40 | 24 | 41 | 46 | ER40RF.D24 | |||||||
40 | 25 | 41 | 46 | ER40RF.D25 | |||||||
40 | 26 | 41 | 46 | ER40RF.D26 |
STANDARDS ER | |||||||||||||||||||||||||
PARAMETERS | ER 11 | ER 16 |
ER 20 |
ER 25 |
ER 32 |
ER 40 | |||||||||||||||||||
d1 | 1÷ 7 | 1÷ 10 | 1÷ 13 | 1÷ 16 | 2÷ 20 | 3÷30 | |||||||||||||||||||
CLAMPING RANGE |
0,5 mm | 0,5÷ 1 mm | 0,5÷ 1 mm | 0,5÷ 1 mm | 0,5÷ 1 mm | 1 mm | |||||||||||||||||||
d2 | 11 | 16 | 20 | 25 | 32 | 40 | |||||||||||||||||||
d3 | 11,5 | 17,0 | 21,0 | 26,0 | 33,0 | 41,0 | |||||||||||||||||||
a AT3 | 8° | 8° | 8° | 8° | 8° | 8° | |||||||||||||||||||
l1 | 18,0 | 27,5 | 31,5 | 34,0 | 40,0 | 46,0 | |||||||||||||||||||
l13 max | 6,6 | 10,6 | 11,5 | 12 | 13 | 15 |
Mounting collets in screw-on caps:
Mounting the collet in the cap |
Properly mounted collet | Unmounting of the collet |
For proper mounting of ER collet follow these steps:
- Put the collet into the cap at slight angle
- Hook the groove of the collet on eccentric or cylindrical edge of the collet (fig. A)
- Jam the collet into the cap (fig. B)
- Screw the cap with collet on the toolholder, so that mounting of the machined tool is possible
Max mounting diameters in regard to ER collet size:
Taper adapter for tools Morse taper shank, DIN 69871-A, TYPE DIN-FV, 1682
Properties and application:
- Material: steel chrome-manganese
- Carburized on depth 0,7 mm
- Hardened and presicely grinded
- Surface hardness 58 ? 2 HRC
- Cone angle tolerance AT3
- Balanced fixtures G6,3 to 12000 rpm.
Technical data:
DIN 69871-A, 1682 |
|||||||||||
K (7:24) | K1 (Morse) | A | M | Rys. | Weight (kg) | Code |
---|---|---|---|---|---|---|
40 | 1 | 45 | M16 | 1 | 0,90 | DIN40.A45.MK1FV |
40 | 2 | 60 | M16 | 1 | 1,00 | DIN40.A60.MK2FV |
40 | 3 | 75 | - | 2 | 1,10 | DIN40.A75.MK3FV |
40 | 4 | 85 | - | 2 | 1,50 | DIN40.A85.MK4FV |
50 | 1 | 45 | M24 | 1 | 3,00 | DIN50.A45.MK1FV |
50 | 2 | 45 | M24 | 1 | 2,80 | DIN50.A45.MK2FV |
50 | 3 | 60 | M24 | 1 | 3,20 | DIN50.A60.MK3FV |
50 | 4 | 75 | M24 | 1 | 3,20 | DIN50.A75.MK4FV |
50 | 5 | 75 | - | 2 | 3,00 | DIN50.A75.MK5FV |
STANDARDS DIN 69871-A |
|||
PARAMETERS | SK 30 | SK 40 | SK 50 |
---|---|---|---|
a | 3,2 | 3,2 | 3,2 |
bh12 | 16,1 | 16,1 | 25,7 |
d1 | 31,75 | 44,45 | 69,85 |
d2 | M12 | M16 | M24 |
d3 | 13 | 17 | 25 |
d5 | 59,30 | 72,30 | 107,25 |
d6 | 50,00 | 63,55 | 97,50 |
d7 | 44,30 | 56,25 | 91,25 |
d8max | 45 | 50 | 80 |
f1 | 11,1 | 11,1 | 11,1 |
f2 | 35 | 35 | 35 |
f3 | 19,1 | 19,1 | 19,1 |
L1 | 47,80 | 68,40 | 101,75 |
L2 | 5,5 | 8,2 | 11,5 |
L3 | 24 | 32 | 47 |
L4 | 33,5 | 42,5 | 61,5 |
L5 | 15,0 | 18,5 | 30,0 |
L6 | 16,4 | 22,8 | 35,5 |
L7 | 19,0 | 25,0 | 37,7 |
Collet system PTEz50, TYPE 7611
Properties and application:
- Material : steel chrome-manganese
- Carburized on depth 0,7 mm
- Hardened and precisely grinded
- Surface hardness 58 ? 2 HRC
- Cone angle tolerance AT3
Technical data:
TYPE PTEz-50 7611 | |||||||||||
PTEz | d | D | L | Code | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
50 | 3 | 28,5 | 50 | PTEz-50.D03 | |||||||
50 | 4 | 28,5 | 50 | PTEz-50.D04 | |||||||
50 | 5 | 28,5 | 50 | PTEz-50.D05 | |||||||
50 | 6 | 28,5 | 50 | PTEz-50.D06 | |||||||
50 | 6,3 | 28,5 | 50 | PTEz-50.D06,3 | |||||||
50 | 7 | 28,5 | 50 | PTEz-50.D07 | |||||||
50 | 8 | 28,5 | 50 | PTEz-50.D08 | |||||||
50 | 9 | 28,5 | 50 | PTEz-50.D09 | |||||||
50 | 10 | 28,5 | 50 | PTEz-50.D10 | |||||||
50 | 11 | 28,5 | 50 | PTEz-50.D11 | |||||||
50 | 12 | 28,5 | 50 | PTEz-50.D12 | |||||||
50 | 13 | 28,5 | 50 | PTEz-50.D13 | |||||||
50 | 14 | 28,5 | 50 | PTEz-50.D14 | |||||||
50 | 15 | 28,5 | 50 | PTEz-50.D15 | |||||||
50 | 16 | 28,5 | 50 | PTEz-50.D16 | |||||||
50 | 17 | 28,5 | 50 | PTEz-50.D17 | |||||||
50 | 18 | 28,5 | 50 | PTEz-50.D18 | |||||||
50 | 19 | 28,5 | 50 | PTEz-50.D19 | |||||||
50 | 20 | 28,5 | 50 | PTEz-50.D20 |
Mounting collets in screw-on caps:
Mounting the collet in the cap |
Properly mounted collet | Unmounting of the collet |
For proper mounting of ER collet follow these steps:
- Put the collet into the cap at slight angle
- Hook the groove of the collet on eccentric or cylindrical edge of the collet (fig. A)
- Jam the collet into the cap (fig. B)
- Screw the cap with collet on the toolholder, so that mounting of the machined tool is possible
Max mounting diameters in regard to ER collet size:
More Articles …
- Collet system ER, EO, PTEz50, DIN 6499, TYPE ER, 7618
- Collet chucks ER for tools with cylindrical shank, DIN 1835, D-ER, 7815
- Collet chucks for ER collets DIN 6499 for tools with cylindrical shank, DIN 228, MK-ER, 7711
- Collet chucks for ER collets DIN 6499 for tools with cylindrical shank, MAS 403-BT, BT-ERS extended version, 7626-S