Darmet Białystok Darmet Białystok

Our adress:

Darmet sp. z o.o.
Zakład Obróbki Skrawaniem
Komunalna 4c street, 15-197 Białystok

Our e-mail:

handel@darmet.com.pl

Telephone number:

+48 85 664 75 34

Latch clamps with safety hook, heavy duty type GN 852.3 (Elesa+Ganter)

Properties and application:

  • The GN 852.3 latch type toggle clamps are compact in design and can be used to ensure high holding capacities
  • When closing the spanner, a safety hook positively locks onto the body
  • This prevents the inadvertent or vibration-induced release from the clamping position
  • To open the safety hook it is unlocked per one-hand operation
  • The U-bolt latch can be adjusted within its range
  • In addition to the standard lengths for the U-bolt latch shown above, more lengths may be achieved by using series GN 951.1 square U-bolts
  • Type T6: with mounting holes, with U-bolt latch, with catch
  • Type T: with mounting holes, without U-bolt latch, with catch
  • Type T6S: for welding, with U-bolt latch, with catch
  • Type TS: for welding, with U-bolt latch, with catch
  • Elesa+Ganter toggle clamps - operating principle

 

GN 852.3
version in steel

GN 852.3-NI
version in stainless steel

 

GN 852.3 - version in steel
Latch clamps with safety hook, heavy duty type GN 852.3

Characteristics:

  • Body, catch and clamping lever are made of steel C22, forged, black lacquered (Type T2 / T) or blackened (Type T2S / TS)
  • U-bolt latch and bearing bolt made of steel St 37
  • All moving parts lubricated with special grease

 

ModelFH
[N]		a1a2b1b2b3b4b5b6b7d1d2d3h1≈h2
GN 852.3-1700-T 17000 - - 68 64 - 48 - - - M10 8,5 14 55 34,5
GN 852.3-1700-T6 17000 22 21 68 64 46 48 - - - M10 8,5 14 55 34,5
GN 852.3-1700-T6S 17000 22 21 - - 46 - 68 26,5 38 M10 - - 55 34,5
GN 852.3-1700-TS 17000 - - - - - - 68 26,5 38 M10 - - 55 34,5
GN 852.3-4000-T 40000 - - 85 80 - 60 - - - M12 10,5 16 68 42,5
GN 852.3-4000-T6 40000 26 27 85 80 55 60 - - - M12 10,5 16 68 42,5
GN 852.3-4000-T6S 40000 26 27 - - 55 - 85 32 50 M12 - - 68 42,5
GN 852.3-4000-TS 40000 - - - - - - 85 32 50 M12 - - 68 42,5
Modell1≈l2 minl3m1m2m3m4m5r≈s1s2tw1w2w2≈Weight
[g]
GN 852.3-1700-T - - 129 45 11,5 45 10 28 - 7 - 2 - - 15 960
GN 852.3-1700-T6 223 32,5 129 45 11,5 45 10 28 96 7 - 2 54 54 15 1127
GN 852.3-1700-T6S 218 32,5 129 - - - - - 96 - 7 - 54 54 15 918
GN 852.3-1700-TS - - 129 - - - - - - - 7 - - - 15 476
GN 852.3-4000-T - - 151 57 14 57 12,5 35 - 9 - 2 - - 25 1735
GN 852.3-4000-T6 271 29,5 151 57 14 57 12,5 35 107 9 - 2 62 62 25 2018
GN 852.3-4000-T6S 266 29,5 151 - - - - - 107 - 9 - 62 62 25 1668
GN 852.3-4000-TS - - 151 - - - - - - - 9 - - - 25 1376

 

GN 852.3 - version in stainless steel
Latch clamps with safety hook, heavy duty type GN 852.3

Characteristics:

  • Body, catch, clamping lever and U-bolt latch are made of stainless steel AISI 304, forged
  • Other parts made of stainless steel AISI 303
  • All moving parts lubricated with special grease

 

ModelFH
[N]		a1a2b1b2b3b4b5b6b7d1d2d3h1≈h2
GN 852.3-1700-T-NI 14000 - - - - - 48 - - - M10 - - 55 34,5
GN 852.3-1700-T6-NI 14000 22 21 68 64 46 48 - - - M10 8,5 14 55 34,5
GN 852.3-1700-T6S-NI 14000 22 21 68 64 46 - 68 26,5 38 M10 8,5 14 55 34,5
GN 852.3-1700-TS-NI 14000 - - - - - - 68 26,5 38 M10 - - 55 34,5
GN 852.3-4000-T-NI 30000 - - - - - 60 - - - M12 - - 68 42,5
GN 852.3-4000-T6-NI 30000 26 27 85 80 55 60 - - - M12 10,5 16 68 42,5
GN 852.3-4000-T6S-NI 30000 26 27 85 80 55 - 85 32 50 M12 10,5 16 68 42,5
GN 852.3-4000-TS-NI 30000 - - - - - - 85 32 50 M12 - - 68 42,5
Modell1≈l2 minl3m1m2m3m4m5r≈s1s2tw1w2w2≈Weight
[g]
GN 852.3-1700-T-NI - - 129 45 11,5 45 10 28 - 7 - 2 - - 15 951
GN 852.3-1700-T6-NI 223 32,5 129 45 11,5 45 10 28 96 7 - 2 54 54 15 1131
GN 852.3-1700-T6S-NI 218 32,5 129 - - - - - 96 - 7 - 54 54 15 932
GN 852.3-1700-TS-NI - - 129 - - - - - - - 7 - - - 15 765
GN 852.3-4000-T-NI - - 151 57 14 57 12,5 35 - 9 - 2 - - 25 1725
GN 852.3-4000-T6-NI 271 29,5 151 57 14 57 12,5 35 107 9 - 2 62 62 25 2017
GN 852.3-4000-T6S-NI 266 29,5 151 - - - - - 107 - 9 - 62 62 25 1691
GN 852.3-4000-TS-NI - - 151 - - - - - - - 9 - - - 25 1391

Latch clamps, heavy duty type GN 852.1 (Elesa+Ganter)

Properties and application:

  • The U-bolt latch of GN 852.1 vertical hook type toggle clamps is adjustable within the adjusting range
  • Once in the clamping position, the latch bolt is perpendicular to the clamping arm and to the mounting base of the toggle clamp
  • In addition to the standard lengths of the U-bolt latches shown in the table, a variety of other lengths are also available under the GN 951.2 series
  • Type T: with fixing holes, without pulling latch, with latch bracket
  • Type T3: with fixing holes, with pulling latch, with latch bracket
  • Type TS: for welding, without pulling latch, with latch bracket
  • Type T3S: for welding, with pulling latch, with latch bracket
  • Elesa+Ganter toggle clamps - operating principle

 

GN 852.1
Latch clamps, heavy duty type GN 852.1

Characteristics:

  • Body and operating handle made of steel C22, forged, blackened
  • Latch bracket made ofheet metal, blackened
  • Pulling latch and bearing pins made of steel St. 37, zinc plated, blue passivated
  • All moving parts lubricated with special grease

 

ModelFH
[N]		a1b1b2b3b4b5b6b7d1d2d3h1≈
GN 852.1-1400-T 12000 15 61 61 46 26 64 42 26 M10 8,5 32,5 64
GN 852.1-1400-T3 12000 15 61 61 46 26 64 42 26 M10 8,5 32,5 64
GN 852.1-1400-TS 12000 15 61 61 46 26 64 42 26 M10 8,5 32,5 64
GN 852.1-1400-T3S 12000 15 61 61 46 26 64 42 26 M10 8,5 32,5 64
Modelh2l1≈l2 minm1m2m3m4m5r≈sw1w2≈Weight
[g]
GN 852.1-1400-T 24 171 42 38 14,5 32 12,5 17 106 8 50 22 954
GN 852.1-1400-T3 24 171 42 38 14,5 32 12,5 17 106 8 50 22 1145
GN 852.1-1400-TS 24 171 42 38 14,5 32 12,5 17 106 8 50 22 1018
GN 852.1-1400-T3S 24 171 42 38 14,5 32 12,5 17 106 8 50 22 838

Latch clamps, heavy duty type GN 852 (Elesa+Ganter)

Properties and application:

  • The heavy duty latch clamps GN 852 are used for very high holding forces as may be encountered in the field of plastic high pressure mould forming
  • The stroke of the pulling latch can be adjusted within its range
  • Besides the standard dimensions of the pulling latch above, more versions are available under GN 951.2
  • Latch clamps with safety pawl on request
  • Type T2: with fixing holes, with pulling latch, with latch bracket
  • Type T: with fixing holes, without pulling latch, with latch bracket
  • Type T2S: for welding, with pulling latch, with latch bracket
  • Type TS: for welding, without pulling latch, with latch bracket
  • Elesa+Ganter toggle clamps - operating principle

 

GN 852
version in steel

GN 852-NI
version in stainless steel

 

GN852 - version in steel
Latch clamps, heavy duty type GN 852 - version in steel

Characteristics:

  • Body, latch bracket and operating handle made of steel C22
  • Forged, black lacquered (Type T2 / T) or blackened (Type T2S / TS)
  • Pulling latch and bearing pins made of steel St 37, zinc plated, blue passivated
  • All moving parts lubricated with special grease

 

ModelFH
[N]		a1a2b1b2b3b4b5b6b7d1d2d3h1≈h2
GN 852-1400-T 17000 22 21 68 64 46 48 - - - M10 8,5 14 52 34,5
GN 852-1400-T2 17000 22 21 68 64 46 48 - - - M10 8,5 14 52 34,5
GN 852-1400-TS 17000 22 21 - - 46 - 68 26,5 38 M10 - - 52 34,5
GN 852-1400-T2S 17000 22 21 - - 46 - 68 26,5 38 M10 - - 52 34,5
GN 852-2800-T 40000 28 27 85 80 55 60 - - - M12 10,5 16 65 42,5
GN 852-2800-T2 40000 28 27 85 80 55 60 - - - M12 10,5 16 65 42,5
GN 852-2800-TS 40000 28 27 - - 55 - 80 32 50 M12 - - 65 42,5
GN 852-2800-T2S 40000 28 27 - - 55 - 80 32 50 M12 - - 65 42,5
Modell1≈l2 minl3≈m1m2m3m4m5r≈ss1tww2≈Weight
[g]
GN 852-1400-T 218 29,5 129 45 11,5 45 10 28 96 7 - 2 63 15 954
GN 852-1400-T2 218 29,5 129 45 11,5 45 10 28 96 7 - 2 63 15 1100
GN 852-1400-TS 218 - 129 - - - - - 96 - 9,2 - 63 15 757
GN 852-1400-T2S 218 - 129 - - - - - 96 - 9,2 - 63 15 934
GN 852-2800-T 265 32,1 151 57 14 57 12,5 35 117 9 - 2 78 15 1811
GN 852-2800-T2 265 32,1 151 57 14 57 12,5 35 117 9 - 2 78 15 2000
GN 852-2800-TS 265 - 151 - - - - - 117 - 12,7 - 78 15 1433
GN 852-2800-T2S 265 - 151 - - - - - 117 - 12,7 - 78 15 1680

 

GN 852-NI - version in stainless steel
Latch clamps, heavy duty type GN 852-NI - version in stainless steel

Characteristics:

  • Body, latch bracket, operating handle and pulling latch made of stainless steel AISI 304
  • Other parts made of stainless steel AISI 303
  • All moving parts lubricated with special grease

 

ModelFH
[N]		a1a2b1b2b3b4b5b6b7d1d2d3h1≈h2
GN 852-1400-T-NI 14000 22 21 68 64 46 48 - - - M10 8,5 14 52 34,5
GN 852-1400-T2-NI 14000 22 21 - - 46 - 68 26,5 38 M10 - - 52 34,5
GN 852-1400-TS-NI 14000 22 21 68 64 46 48 - - - M10 8,5 14 52 34,5
GN 852-1400-T2S-NI 14000 22 21 - - 46 - 68 26,5 38 M10 - - 52 34,5
GN 852-2800-T-NI 30000 28 27 85 80 55 60 - - - M12 10,5 16 65 42,5
GN 852-2800-T2-NI 30000 28 27 - - 55 - 80 32 50 M12 - - 65 42,5
GN 852-2800-TS-NI 30000 28 27 85 80 55 60 - - - M12 10,5 16 65 42,5
GN 852-2800-T2S-NI 30000 28 27 - - 55 - 80 32 50 M12 - - 65 42,5
Modell1≈l2 minl3≈m1m2m3m4m5r≈ss1tww2≈Weight
[g]
GN 852-1400-T-NI 218 29,5 129 45 11,5 45 10 28 96 7 - 2 63 15 930
GN 852-1400-T2-NI 218 - 129 - - - - - 96 - 9,2 - 63 15 1100
GN 852-1400-TS-NI 218 29,5 129 45 11,5 15 10 28 96 7 - 2 63 15 756
GN 852-1400-T2S-NI 218 - 129 - - - - - 96 - 9,2 - 63 15 900
GN 852-2800-T-NI 265 32,1 151 57 14 57 12,5 35 117 9 - 2 78 15 1851
GN 852-2800-T2-NI 265 - 151 - - - - - 117 - 12,7 - 78 15 2127
GN 852-2800-TS-NI 265 32,1 151 57 14 57 12,5 35 117 9 - 2 78 15 1421
GN 852-2800-T2S-NI 265 - 151 - - - - - 117 - 12,7 - 78 15 1708

Latch clamps with safety hook, with pulling action GN 851.3 (Elesa+Ganter)

Properties and application:

  • The GN 851.3 latch type toggle clamps are compact in design and can be used to ensure high holding capacities
  • When closing the spanner, a safety hook positively locks onto the body
  • This prevents the inadvertent or vibration-induced release from the clamping position
  • To open the safety hook it is unlocked per one-hand operation
  • The U-bolt latch can be adjusted within its range
  • In addition to the standard lengths for the U-bolt latch shown above, more lengths may be achieved by using series GN 951.1 square U-bolts
  • Type T6: with U-bolt latch, with catch
  • Type T: without U-bolt latch, with catch
  • Elesa+Ganter toggle clamps - operating principle

 

GN 851.3
version in steel

GN 851.3-NI
version in stainless steel

 

GN851.3 - version in steel
Latch clamps with safety hook, with pulling action GN 851.3 - version in steel

Characteristics:

  • Made of case hardened steel C10, zinc plated, blue passivated
  • U-bolt latch made of steel (St 37), zinc plated, blue passivated
  • All moving parts lubricated with special grease

Handle grip:

  • Solid moulded plastic handle sleeve, red, oil resistant

 

ModelFH
[N]		ab1b2b3b4b5d1d2h1≈h2l1l2 minm1m2m3m4m5r≈sw1w2≈Weight
[g]
GN851.3-160-T6 1600 12 26 28 21 20 14 M4 4,3 31 18 99 11 19 5 16 5 10 35 2 25 11 100
GN851.3-160-T 1600 - 26 28 - 20 14 - 4,3 31 18 - - 19 5 16 5 10 - 2 - - 100
GN851.3-320-T6 3200 16 40 44 32 28 22 M6 6,5 45 25 166 20 32 10,5 19 7 14,3 54 3 35 13 300
GN851.3-320-T 3200 - 40 44 - 28 22 - 6,5 45 25 - - 32 10,5 19 7 14,3 - 3 - - 256
GN851.3-700-T6 7000 24 60 54 38 38 26 M8 8,5 56 36 217 25 38 9,5 41,5 9,5 19 70 3,5 49 26 595
GN851.3-700-T 7000 - 60 54 - 38 26 - 8,5 56 36 - - 38 9,5 41,5 9,5 19 - 3,5 - - 505

 

GN 851.3-NI - version in stainless steel
Latch clamps with safety hook, with pulling action GN 851.3-NI - version in stainless steel

Characteristics:

  • Sheet metal parts, U-bolt latch and pin made of stainless steel AISI 316L
  • All moving parts lubricated with special grease

Handle grip:

  • Solid moulded plastic handle sleeve, red, oil resistant

 

ModelFH
[N]		ab1b2b3b4b5d1d2h1≈h2l1l2 minm1m2m3m4m5r≈sw1w2≈Weight
[g]
GN851.3-160-T6-NI 1600 12 26 28 21 20 14 M4 4,3 31 18 99 11 19 5 16 5 10 35 2 25 11 92
GN851.3-160-T-NI 1600 - 26 28 - 20 14 - 4,3 31 18 - - 19 5 16 5 10 - 2 - - 80
GN851.3-320-T6-NI 3200 16 40 44 32 28 22 M6 6,5 45 25 166 20 32 10,5 19 7 14,3 54 3 35 13 300
GN851.3-320-T-NI 3200 - 40 44 - 28 22 - 6,5 45 25 - - 32 10,5 19 7 14,3 - 3 - - 261
GN851.3-700-T6-NI 7000 24 60 54 38 38 26 M8 8,5 56 36 217 25 38 9,5 41,5 9,5 19 70 3,5 49 26 595
GN851.3-700-T-NI 7000 - 60 54 - 38 26 - 8,5 56 36 - - 38 9,5 41,5 9,5 19 - 3,5 - - 499

Latch clamps for pulling action GN 851.2 (Elesa+Ganter)

Properties and application:

  • The pulling hook of the latch clamps GN 851.2 can be adjusted within the stroke
  • In the clamped position the pulling latch and the clamping arm are horizontal to the vertical fixing plane
  • Besides the standard dimensions of the pulling latch above, more versions are available under GN 951.1
  • Type T4: with pulling latch, with latch bracket
  • Type T: without pulling latch, with latch bracket
  • Elesa+Ganter toggle clamps - operating principle

 

GN 851.2
Latch clamps GN 851.2

Characteristics:

  • Parts in sheet metal (case hardening steel C10), zinc plated, blue passivated
  • Pulling latch made of steel (St 37), zinc plated, blue passivated
  • All moving parts lubricated with special grease

Handle grip:

  • Solid moulded plastic handle sleeve, red, oil resistant

 

ModelFH
[N]		ab1b2b3b4b5d1d2h1≈h2l1≈l2 minm1m2m3m4m5r≈sw1w2Weight
[g]
GN851.2-160-T 1600 5 26 35 21 25,5 14 M4 4,3 40 10 104 4,5 22 6,5 13 6,5 14,3 50 2 32 11 100
GN851.2-160-T4 1600 5 26 35 21 25,5 14 M4 4,3 40 10 104 4,5 22 6,5 13 6,5 14,3 50 2 32 11 100
GN851.2-320-T 3200 8 36 44 32 37 22 M6 6,5 57,5 15 132 6 25,5 8,5 19 10,5 20,5 78 3 53 15 260
GN851.2-320-T4 3200 8 36 44 32 37 22 M6 6,5 57,5 15 132 6 25,5 8,5 19 10,5 20,5 78 3 53 15 305
GN851.2-700-T 7000 13 52 54 38 48,5 26 M8 8,5 82 23 225 8 36,5 10 32 13,5 27 102 3,5 64 21 675
GN851.2-700-T4 7000 13 52 54 38 48,5 26 M8 8,5 82 23 225 8 36,5 10 32 13,5 27 102 3,5 64 21 675

More Articles …

  1. Latch clamps with horizontal support base and vertical clamping arm GN 851.1 (Elesa+Ganter)
  2. Latch clamps GN 851 (Elesa+Ganter)
  3. Hook clamps with pulling action GN 850 (Elesa+Ganter)

Page 4 of 5

Main Menu

Categories

logo darmet