- 85 664 75 34
- handel@darmet.com.pl
- Darmet sp. z o.o.
Zakład Obróbki Skrawaniem
ul. Komunalna 4c, 15-197 Białystok
Our adress:
Darmet sp. z o.o.
Zakład Obróbki Skrawaniem
Komunalna 4c street, 15-197 Białystok
Our e-mail:
handel@darmet.com.pl
Telephone number:
+48 85 664 75 34
Select your language
Select your language
Hook clamps GN 831 (Elesa+Ganter)
Properties and application:
- Hook clamps GN 831 are used among others for the secure holding of flaps and container lids
- The clamps will lock securely over the centre and are thus vibration proof
- The stroke w1 of the clamping hook can pull the parts to be clamped together by up to 6 mm
- The range w2 can be adjusted on the M6 threaded spindle at the clamping hook
- The types S and SV prevent unwanted release of the hook clamp
- Screws with low head height such as DIN 6912 are used to fix the hook clamps
- The load specified in the table are simply guide line values for a nominal static pulling force which the lock can withstand
- Depending on the conditions under which these hook lock clamps are used such as vibration or shock loads, the holding capacity can be adversely affected
- The catch bracket is included
- Type A: without safety catch
- Type S: with safety catch
- Type SV: for safety catch with padlock
- No. 1: long Type
- No. 2: short Type
- Elesa+Ganter - technical information
GN 831 | GN 831-NI |
GN 831 - Version is steel |
 |
Characteristics:
- Zinc plated, blue passivated surface
 | ||||||||||||||
| Model | FH [N] | b1 | b2 | b3 | b4 | d | h1 | h2 | h3 | h4 | l1 min | l2 min | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 831-100-A-ST-1 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | - | - | 67 | 56 | ||
| GN 831-100-A-ST-2 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | - | - | - | - | ||
| GN 831-100-S-ST-1 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | 21,5 | - | 71 | 63 | ||
| GN 831-100-S-ST-2 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | 21,5 | - | - | - | ||
| GN 831-100-SV-ST-1 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | - | 25,5 | 67 | 56 | ||
| GN 831-100-SV-ST-2 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | - | 25,5 | - | - | ||
| Model | l3 | l4 min | l5 min | m1 | m2 | m3 | m4 | r | w1 ≈ | w2 ≈ | Weight [g] | |||
| GN 831-100-A-ST-1 | 19,5 | - | - | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 12 | 55 | |||
| GN 831-100-A-ST-2 | 19,5 | 31 | 54 | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 21 | 55 | |||
| GN 831-100-S-ST-1 | 19,5 | - | - | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 8 | 58 | |||
| GN 831-100-S-ST-2 | 19,5 | 38 | 61 | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 8 | 58 | |||
| GN 831-100-SV-ST-1 | 19,5 | - | - | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 12 | 55 | |||
| GN 831-100-SV-ST-2 | 19,5 | 38 | 54 | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 12 | 55 | |||
GN 831-NI - Version is stainless steel |
|
Characteristics:
- Parts in sheet metal AISI 305
- Clamping hook / pin AISI 3033
| ||||||||||||||
| Model | FH [N] | b1 | b2 | b3 | b4 | d | h1 | h2 | h3 | h4 | l1 min | l2 min | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 831-100-A-NI-1 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | - | - | 67 | 56 | ||
| GN 831-100-A-NI-2 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | - | - | - | - | ||
| GN 831-100-S-NI-1 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | 21,5 | - | 71 | 63 | ||
| GN 831-100-S-NI-2 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | 21,5 | - | - | - | ||
| GN 831-100-SV-NI-1 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | - | 25,5 | 67 | 56 | ||
| GN 831-100-SV-NI-2 | 1000 | 25,5 | 22 | 26 | 14 | 4,2 | 18,5 | 8,5 | - | 25,5 | - | - | ||
| Model | l3 | l4 min | l5 min | m1 | m2 | m3 | m4 | r | w1 ≈ | w2 ≈ | Weight [g] | |||
| GN 831-100-A-NI-1 | 19,5 | - | - | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 12 | 54 | |||
| GN 831-100-A-NI-2 | 19,5 | 31 | 54 | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 21 | 55 | |||
| GN 831-100-S-NI-1 | 19,5 | - | - | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 8 | 59 | |||
| GN 831-100-S-NI-2 | 19,5 | 38 | 61 | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 8 | 50 | |||
| GN 831-100-SV-NI-1 | 19,5 | - | - | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 12 | 55 | |||
| GN 831-100-SV-NI-2 | 19,5 | 38 | 54 | 14,3 | 7 | 4 | 8 | 51 | 5,5 | 12 | 57 | |||
Hook clamps GN 821 (Elesa+Ganter)
Properties and application:
- Hook clamps GN 821 are used among others for the secure holding of flaps and container lids
- The clamps will lock securely over the centre and are thus vibration proof
- The stroke w1 of the clamping hook can pull the parts to be clamped together by up to 6 mm
- The range w2 can be adjusted on the M6 threaded spindle at the clamping hook
- The types S, SV and SS prevent unwanted release of the hook clamp
- In the standard version the hook clamps of type SS have the same lock and / or the same key
- The load specified in the table are simply guide line values for a nominal static pulling force which the lock can withstand
- Depending on the conditions under which these hook lock clamps are used such as vibration or shock loads, the holding capacity can be adversely affected
- The catch bracket is included
- Type A: without safety catch
- Type S: with safety catch
- Type SV: for safety catch with padlock
- Type SS: with lock
- No. 1: long type
- No. 2: short type
- Elesa+Ganter - technical information
GN 821 | GN 821-NI |
GN 821 - Version in steel |
 |
Characteristics:
- Zinc plated, blue passivated surface
 | |||||||||||||
| Model | FH [N] | b1 | b2 | b3 | b4 | h1 | h2 | h3 | h4 | l1 min | l2 min | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 821-400-A-ST-1 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | - | - | 144 | 120,5 | ||
| GN 821-400-A-ST-2 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | - | - | - | - | ||
| GN 821-400-S-ST-1 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | 28,5 | - | 147 | 123,5 | ||
| GN 821-400-S-ST-2 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | 28,5 | - | - | - | ||
| GN 821-400-SS-ST-1 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | 28,5 | 32,5 | 147 | 123,5 | ||
| GN 821-400-SS-ST-2 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | 28,5 | 32,5 | - | - | ||
| GN 821-400-SV-ST-1 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | - | 32,5 | 144 | 120,5 | ||
| GN 821-400-SV-ST-2 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | - | 32,5 | - | - | ||
| Model | l3 | l4 min | l5 min | d | m1 | m2 | m3 | r | w1 ≈ | w2 ≈ | Weight [g] | ||
| GN 821-400-A-ST-1 | 32 | - | - | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 15 | 213 | ||
| GN 821-400-A-ST-2 | 32 | 80,5 | 118 | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 15 | 210 | ||
| GN 821-400-S-ST-1 | 32 | - | - | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 8 | 220 | ||
| GN 821-400-S-ST-2 | 32 | 83,5 | 121 | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 8 | 218 | ||
| GN 821-400-SS-ST-1 | 32 | - | - | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 8 | 240 | ||
| GN 821-400-SS-ST-2 | 32 | 83,5 | 121 | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 8 | 240 | ||
| GN 821-400-SV-ST-1 | 32 | - | - | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 15 | 220 | ||
| GN 821-400-SV-ST-2 | 32 | 80,5 | 118 | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 15 | 220 | ||
GN 821-NI - Version in stainless steel |
 |
Characteristics:
- Parts in sheet metal AISI 305
- Clamping hook / pin AISI 303
| |||||||||||||
| Model | FH [N] | b1 | b2 | b3 | b4 | h1 | h2 | h3 | h4 | l1 min | l2 min | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 821-400-A-NI-1 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | - | - | 144 | 120,5 | ||
| GN 821-400-A-NI-2 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | - | - | - | - | ||
| GN 821-400-S-NI-1 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | 28,5 | - | 147 | 123,5 | ||
| GN 821-400-S-NI-2 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | 28,5 | - | - | - | ||
| GN 821-400-SV-NI-1 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | - | 32,5 | 144 | 120,5 | ||
| GN 821-400-SV-NI-2 | 4000 | 46,5 | 45 | 38 | 27 | 22 | 12 | - | 32,5 | - | - | ||
| Model | l3 | l4 min | l5 min | d | m1 | m2 | m3 | r | w1 ≈ | w2 ≈ | Weight [g] | ||
| GN 821-400-A-NI-1 | 32 | - | - | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 15 | 208 | ||
| GN 821-400-A-NI-2 | 32 | 80,5 | 118 | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 15 | 220 | ||
| GN 821-400-S-NI-1 | 32 | - | - | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 8 | 220 | ||
| GN 821-400-S-NI-2 | 32 | 83,5 | 121 | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 8 | 218 | ||
| GN 821-400-SV-NI-1 | 32 | - | - | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 15 | 220 | ||
| GN 821-400-SV-NI-2 | 32 | 80,5 | 118 | 6,3 | 20 | 12 | 11,5 | 107,5 | 6,5 | 15 | 220 | ||
Latch clamps with locking mechanism GN 858 (Elesa+Ganter)
Properties and application:
- The latch clamp GN 858 is used when very high retaining forces occur
- The latch clamp also features a locking mechanism which prevents the inadvertent or vibration-induced opening of the clamp
- Another benefit is the option of operating the clamp with one hand
- Latch brackets are included
- Type T5: with fixing holes (d2)
- Elesa+Ganter toggle clamps - operating principle
GN 858 |
 |
Characteristics:
- Forged steel, precision die casting, chemically blackened
- Steel bearing pins, hardened and ground
- All moving parts lubricated with special grease
Hand grip:
- Solid moulded plastic handle sleeve, red, oil resistant
 |
||||||||||||||||||||||
| Model | FH [N] | a | b1 | b2 | b3 | b4 | d1 | d2 | h1 | h2 | l1≈ | h2 min | m1 | m2 | m3 | m4 | r≈ | s | w1 | w2 | Weight [g] | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 858-1400-T5 | 15000 | 22 | 115 | 51,5 | 66 | 22 | 10 | 8,5 | 57 | 38 | 318 | 47 | 21 | 95 | 11 | 44 | 97,5 | 5 | 24 | 22 | 1633 | |
Description of function (for one-hand operation):
 |
 |
 |
| Press the release button for releasing. | ift the clamping arm until the tie-rod disengages from the latch bracket. | Retracting the clamping arm will lift the tie-rod and release the latch bracket (one-hand operation). |
 |
 |
| For clamping operation, lift the clamping arm until it rests on the latch bracket. | The clamping arm engages in the latch bracket if the releasing button is pressed for the clamping operation. When clamping in the end position, the system locks automatically by spring force. |
Latch clamps with trigger function GN 854 (Elesa+Ganter)
Właściwości i zastosowanie:
- The outstanding feature of GN 854 latch clamps is their highly robust, sturdy and compact design, allowing their use under demanding conditions, e.g. exposure to high temperatures, dust, spray mist, etc.
- The specially designed latch bracket allows the forced loosening of the clamping by the clamping arm moving the pulling latch forward, e.g. for separating mould halves
- Latch clamps with bore (coding 1) are operated with a gear lever handle which is plugged into the latch and pulled off after operation - this saves space and has the added advantage that the gear lever handle is not exposed to adverse ambient conditions, e.g. turning too hot to operate
- The gear lever handle is not included in the delivery
- The latch bracket can also be attached using screws or bolts
- If required, clamping elements and pulling latches are also available as separate parts; for replacement, the bearing bolt is easily dismantled
- Type T2S: for welding
- Coding 1: with bore
- Coding 2: with clamping arm
- Elesa+Ganter toggle clamps - operating principle
GN 854 |
 |
Characteristics:
- Clamping bearing and clamping arm made of steel, forged, weldable, no coating
- Pulling latch and bearing pins made of steel St 37, no coating
- Latch bracket made of sheet metal steel, no coating
  |
|||||||||||||
| Model | FH [N] | a1 | a2 | b1 | b2 | b3 | b4 | b5 | b6 | d1 | d2 | d3 | h1≈ |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 854-1500-1-T2S | 15000 | 26 | 28 | 65 | 43 | 52 | 70 | 72 | 30 | M10 | 8,5 | 18 | 55 |
| GN 854-1500-2-T2S | 15000 | 26 | 28 | 65 | 43 | 52 | 70 | 72 | 30 | M10 | 8,5 | - | 81 |
| Model | h2 | l1≈ | l2 min | m1 | m2 | r | t | w1 | GN 851.3 w2 | w2≈ | w3≈ | w4≈ | Weight [g] |
| GN 854-1500-1-T2S | 55 | 220 | 186 | 40 | 16 | 120 | 30 | 10,5 | 40 | 28 | 25 | 40 | 1234 |
| GN 854-1500-2-T2S | 55 | 334 | 186 | 40 | 16 | 120 | 30 | 10,5 | 40 | 28 | 25 | 40 | 1331 |
Latch clamps with locking mechanism GN 853 (Elesa+Ganter)
Properties and application:
- Latch clamps GN 853 feature a locking mechanism which prevents an inadvertent or vibration-induced opening of the clamp
- Another benefit is the option of operating the clamp with one hand
- Type T5: without tie-rod, without latch bracket
- Type TG: with tie-rod, with latch bracket, tie-rod with drawbar eye
- Type TT: with tie-rod, with latch bracket, tie-rod with T-piece
- Type TU: with tie-rod, with latch bracket, tie-rod with hook
- Elesa+Ganter toggle clamps - operating principle
GN 853
|
GN 853-NI
|
GN 853 - version in steel |
 |
Characteristics:
- Parts in sheet metal made of hardened steel C10, blackened
- Tie-rod made of steel St 32, blackened
- All moving parts lubricated with special grease
Hand grip:
- Solid moulded plastic handle sleeve, red, oil resistant
 |
||||||||||||||||
| Model | FH [N] | a | b1 | b2 | b3 | b4 | b5 | b6 | b7 | d1 | d2 | d3 | d4 | d5 | h1≈ | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 853-160-T5 | 1750 | 13 | 26 | 28 | - | - | - | - | - | M6 | 4,5 | - | 5,2 | 6 | 27 | |
| GN 853-160-TG | 1750 | 13 | 26 | 28 | 23 | - | 26 | - | 6,8 | M6 | 4,5 | 4,5 | 5,2 | 6 | 27 | |
| GN 853-160-TU | 1750 | 13 | 26 | 28 | - | 14 | 26 | - | - | M6 | 4,5 | 4,5 | 5,2 | 6 | 27 | |
| GN 853-160-TT | 1750 | 13 | 26 | 28 | - | 14 | - | 35 | - | M6 | 4,5 | 4,5 | 5,2 | 6 | 27 | |
| GN 853-320-T5 | 4000 | 19 | 40 | 44 | - | - | - | - | - | M8 | 6,7 | - | 7 | 8 | 38,5 | |
| GN 853-320-TG | 4000 | 19 | 40 | 44 | 34 | - | 35 | - | 10 | M8 | 6,7 | 6,7 | 7 | 8 | 38,5 | |
| GN 853-320-TU | 4000 | 19 | 40 | 44 | - | 18 | 35 | - | - | M8 | 6,7 | 6,7 | 7 | 8 | 38,5 | |
| GN 853-320-TT | 4000 | 19 | 40 | 44 | - | 18 | - | 38 | - | M8 | 6,7 | 6,7 | 7 | 8 | 38,5 | |
| GN 853-700-T5 | 7500 | 28 | 60 | 54 | - | - | - | - | - | M10 | 8,5 | - | 9 | 10 | 53 | |
| GN 853-700-TG | 7500 | 28 | 60 | 54 | 41 | - | 50 | - | 11 | M10 | 8,5 | 8,5 | 9 | 10 | 53 | |
| GN 853-700-TU | 7500 | 28 | 60 | 54 | - | 26 | 50 | - | - | M10 | 8,5 | 8,5 | 9 | 10 | 53 | |
| GN 853-700-TT | 7500 | 28 | 60 | 54 | - | 26 | - | 50 | - | M10 | 8,5 | 8,5 | 9 | 10 | 53 | |
| Model | h2 | h3 | l1≈ | l2≈ | l3≈ | l4≈ | l5 | l6 | m1 | m2 | m3 | m4 | m5 | s | w | Weight [g] |
| GN 853-160-T5 | - | - | 103 | - | - | - | - | 30 | 19 | 16 | - | - | - | 2 | 8 | 80 |
| GN 853-160-TG | 20 | - | 103 | 55 | - | - | 28 | 30 | 19 | 16 | 16 | 14,3 | - | 2 | 8 | 130 |
| GN 853-160-TU | 20 | - | 103 | - | 55 | - | 28 | 30 | 19 | 16 | 16 | - | - | 2 | 8 | 120 |
| GN 853-160-TT | - | 20,5 | 103 | - | - | 54 | 28 | 30 | 19 | 16 | - | - | 25,4 | 2 | 8 | 120 |
| GN 853-320-T5 | - | - | 153 | - | - | - | - | 44,5 | 32 | 19 | - | - | - | 3 | 13 | 297 |
| GN 853-320-TG | 30 | - | 153 | 76,5 | - | - | 34 | 44,5 | 32 | 19 | 19 | 22,3 | - | 3 | 13 | 383 |
| GN 853-320-TU | 30 | - | 153 | - | 76,5 | - | 34 | 44,5 | 32 | 19 | 19 | - | - | 3 | 13 | 380 |
| GN 853-320-TT | - | 28 | 153 | - | - | 76,5 | 34 | 44,5 | 32 | 19 | - | - | 25,4 | 3 | 13 | 360 |
| GN 853-700-T5 | - | - | 222 | - | - | - | - | 51 | 38 | 41,5 | - | - | - | 3,5 | 19 | 686 |
| GN 853-700-TG | 40,5 | - | 222 | 95,5 | - | - | 42 | 51 | 38 | 41,5 | 31 | 25,4 | - | 3,5 | 19 | 880 |
| GN 853-700-TU | 40,5 | - | 222 | - | 95,5 | - | 42 | 51 | 38 | 41,5 | 31 | - | - | 3,5 | 19 | 840 |
| GN 853-700-TT | - | 39 | 222 | - | - | 92 | 42 | 51 | 38 | 41,5 | - | - | 31 | 3,5 | 19 | 840 |
GN 853 - version in stainless steel |
 |
Characteristics:
- Parts in sheet metal made of stainless steel AISI 304
- Tie-rod made of stainless steel AISI 304
- All moving parts lubricated with special grease
Hand grip:
- Solid moulded plastic handle sleeve, red, oil resistant
|
||||||||||||||||
| Model | FH [N] | a | b1 | b2 | b3 | b4 | b5 | b6 | b7 | d1 | d2 | d3 | d4 | d5 | h1≈ | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 853-160-T5-NI | 1750 | 13 | 26 | 28 | - | - | - | - | - | M6 | 4,5 | - | 5,2 | 6 | 27 | |
| GN 853-160-TG-NI | 1750 | 13 | 26 | 28 | 23 | - | 26 | - | 6,8 | M6 | 4,5 | 4,5 | 5,2 | 6 | 27 | |
| GN 853-160-TU-NI | 1750 | 13 | 26 | 28 | - | 14 | 26 | - | - | M6 | 4,5 | 4,5 | 5,2 | 6 | 27 | |
| GN 853-160-TT-NI | 1750 | 13 | 26 | 28 | - | 14 | - | 35 | - | M6 | 4,5 | 4,5 | 5,2 | 6 | 27 | |
| GN 853-320-T5-NI | 4000 | 19 | 40 | 44 | - | - | - | - | - | M8 | 6,7 | - | 7 | 8 | 38,5 | |
| GN 853-320-TG-NI | 4000 | 19 | 40 | 44 | 34 | - | 35 | - | 10 | M8 | 6,7 | 6,7 | 7 | 8 | 38,5 | |
| GN 853-320-TU-NI | 4000 | 19 | 40 | 44 | - | 18 | 35 | - | - | M8 | 6,7 | 6,7 | 7 | 8 | 38,5 | |
| GN 853-320-TT-NI | 4000 | 19 | 40 | 44 | - | 18 | - | 38 | - | M8 | 6,7 | 6,7 | 7 | 8 | 38,5 | |
| GN 853-700-T5-NI | 7500 | 28 | 60 | 54 | - | - | - | - | - | M10 | 8,5 | - | 9 | 10 | 53 | |
| GN 853-700-TG-NI | 7500 | 28 | 60 | 54 | 41 | - | 50 | - | 11 | M10 | 8,5 | 8,5 | 9 | 10 | 53 | |
| GN 853-700-TU-NI | 7500 | 28 | 60 | 54 | - | 26 | 50 | - | - | M10 | 8,5 | 8,5 | 9 | 10 | 53 | |
| GN 853-700-TT-NI | 7500 | 28 | 60 | 54 | - | 26 | - | 50 | - | M10 | 8,5 | 8,5 | 9 | 10 | 53 | |
| Model | h2 | h3 | l1≈ | l2≈ | l3≈ | l4≈ | l5 | l6 | m1 | m2 | m3 | m4 | m5 | s | w | Weight [g] |
| GN 853-160-T5-NI | - | - | 103 | - | - | - | - | 30 | 19 | 16 | - | - | - | 2 | 8 | 97 |
| GN 853-160-TG-NI | 20 | - | 103 | 55 | - | - | 28 | 30 | 19 | 16 | 16 | 14,3 | - | 2 | 8 | 100 |
| GN 853-160-TU-NI | 20 | - | 103 | - | 55 | - | 28 | 30 | 19 | 16 | 16 | - | - | 2 | 8 | 134 |
| GN 853-160-TT-NI | - | 20,5 | 103 | - | - | 54 | 28 | 30 | 19 | 16 | - | - | 25,4 | 2 | 8 | 120 |
| GN 853-320-T5-NI | - | - | 153 | - | - | - | - | 44,5 | 32 | 19 | - | - | - | 3 | 13 | 300 |
| GN 853-320-TG-NI | 30 | - | 153 | 76,5 | - | - | 34 | 44,5 | 32 | 19 | 19 | 22,3 | - | 3 | 13 | 330 |
| GN 853-320-TU-NI | 30 | - | 153 | - | 76,5 | - | 34 | 44,5 | 32 | 19 | 19 | - | - | 3 | 13 | 380 |
| GN 853-320-TT-NI | - | 28 | 153 | - | - | 76,5 | 34 | 44,5 | 32 | 19 | - | - | 25,4 | 3 | 13 | 360 |
| GN 853-700-T5-NI | - | - | 222 | - | - | - | - | 51 | 38 | 41,5 | - | - | - | 3,5 | 19 | 681 |
| GN 853-700-TG-NI | 40,5 | - | 222 | 95,5 | - | - | 42 | 51 | 38 | 41,5 | 31 | 25,4 | - | 3,5 | 19 | 883 |
| GN 853-700-TU-NI | 40,5 | - | 222 | - | 95,5 | - | 42 | 51 | 38 | 41,5 | 31 | - | - | 3,5 | 19 | 858 |
| GN 853-700-TT-NI | - | 39 | 222 | - | - | 92 | 42 | 51 | 38 | 41,5 | - | - | 31 | 3,5 | 19 | 870 |
Description of function (for one-hand operation):
|
|
|
| Press the release button for releasing. | ift the clamping arm until the tie-rod disengages from the latch bracket. | Retracting the clamping arm will lift the tie-rod and release the latch bracket (one-hand operation). |
|
|
| For clamping operation, lift the clamping arm until it rests on the latch bracket. | The clamping arm engages in the latch bracket if the releasing button is pressed for the clamping operation. When clamping in the end position, the system locks automatically by spring force. |