ELESA+GANTER

A+ A A-

Toggle Clamps

Pneumatic toggle clamps with additional manual operation GN 862.1 (Elesa+Ganter)

Properties and appliction:

  • GN 862.1 pneumatic toggle clamps are built from the same construction as GN 862
  • The special features of these clamps are that they can be mounted in two different planes, and they can also be operated manually via the grip handle
  • For example, they can individually be manually closed, and then all clamps can be opened at once via the pneumatic function
  • To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar
  • GN 862.1 pneumatic toggle clamps are also available as a version M (magnetic piston)
  • In conjunction with GN 896.2 proximity switches, the piston position can be sensed and the generated impulse can be used to transmit an electrical signal
  • Type APV3S: U-bar version, with two flanged washers
  • Type CPV3S: U-bar version, with two flanged washers and GN 708.1 Spindle Assmebly
  • Type EPV3S: Solid bar version, with clasp
  • Coding M: Magnetic piston
  • Elesa+Ganter toggle clamps - operating principle

 

GN 862.1

Pneumatic toggle clamps with additional manual operation GN 862.1

Characteristics:

  • Parts in sheet metal (case-hardened steel C10), zinc plated, blue passivated finish
  • Bearing pins hardened
  • Bearing rivets, case-hardened
  • Air cylinder bearing pins case-hardened
  • Double-action air cylinder, maximum pressure 6 bar
  • All moving parts lubricated with special grease
  • Spindle assembly GN 708.1 (Type A): steel, zinc plated
  • Rubber tip: 85 Shore A

 

ModelFh
[N]
Fs
[N]
ab1b2b3b4b5d1d2d3Inner Ø for hoseeh1h2
GN862.1-200-APV3S16009703459,538,551358,5M86,5G1/8439,529678
GN862.1-200-CPV3S16009703459,538,551358,5M86,5G1/8439,529678
GN862.1-200-EPV3S1600970-59,538,55135-M86,5G1/8439,529678
GN862.1-200-APV3S-M1600970-59,538,551358,5M86,5G1/8439,529678
GN862.1-200-CPV3S-M16009703459,538,551358,5M86,5G1/8439,529678
GN862.1-200-EPV3S-M1600970-59,538,55135-M86,5G1/8439,529678
GN862.1-300-APV3S240010504268,55360,55010,3M108,5G1/4650,5360108
GN862.1-300-CPV3S240010504268,55360,55010,3M108,5G1/4650,5360108
GN862.1-300-EPV3S24001050-68,55360,550-M108,5G1/4650,5360108
GN862.1-300-APV3S-M240010504268,55360,55010,3M108,5G1/4650,5360108
GN862.1-300-CPV3S-M240010504268,55360,55010,3M108,5G1/4650,5360108
GN862.1-300-EPV3S-M24001050-68,55360,550-M108,5G1/4650,5360108
Modelh3h4h5l1l2l3
max
l4m1m2m3m4m5r≈swWeight
[g]
GN862.1-200-APV3S17--15059--2614,516111698--1218
GN862.1-200-CPV3S17355415059-682614,516111698-211253
GN862.1-200-EPV3S17--150-80-2614,5161116986-1209
GN862.1-200-APV3S-M17--15059--2614,516111698--1250
GN862.1-200-CPV3S-M17355415059-682614,516111698-211500
GN862.1-200-EPV3S-M17--150-80-2614,5161116986-1256
GN862.1-300-APV3S20--18774--3016,5281230122--2123
GN862.1-300-CPV3S204179,518774-773016,5281230122-212180
GN862.1-300-EPV3S20--187-104-3016,52812301228-2140
GN862.1-300-APV3S-M20--18774--3016,5281230122--2116
GN862.1-300-CPV3S-M204179,518774-773016,5281230122-212186
GN862.1-300-EPV3S-M20--187-107-3016,52812301228-2138

Pneumatically operated clamps with vertical mounting base GN 862 (Elesa+Ganter)

Properties and application:

  • The clamping principle of GN 862 pneumatic toggle clamps is identical in construction and dimensions to the manually operated GN 812 vertical toggle clamps
  • To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar
  • GN 862 pneumatic toggle clamps are also available in sizes 200 and up as a version M (magnetic piston)
  • In conjunction with GN 896.2 proximity switches, the piston position can be sensed and the generated impulse can be used to transmit an electrical signal
  • Type APV3: U-bar version, with two flanged washers
  • Type CPV3: U-bar version, with two flanged washers and GN 708.1 Spindle Assembly
  • Type EPV3: Solid bar version, with clasp
  • Coding M: Magnetic piston
  • Elesa+Ganter toggle clamps - operating principle

 

GN 862

Pneumatically operated clamps with vertical mounting base GN 862

Characteristics:

  • Parts in sheet metal (case-hardened steel C10), zinc plated, blue passivated finish
  • Bearing pins hardened
  • Bearing rivets, case-hardened
  • Air cylinder bearing pins case-hardened
  • Double-action air cylinder, maximum pressure 6 bar
  • All moving parts lubricated with special grease
  • Spindle assembly GN 708.1 (Type A): steel, zinc plated
  • Rubber tip: 85 Shore A

 

ModelFh
[N]
Fs
[N]
ab1b2b3b4b5d1d2d3inner Ø for hoseeh1h2
GN862-200-APV316009703459,538,551358,5M86,5G1/8439,521078
GN862-200-CPV316009703459,538,551358,5M86,5G1/8439,521078
GN862-200-EPV31600970-59,538,55135-M86,5G1/8439,521078
GN862-200-APV3-M16009703459,538,551358,5M86,5G1/8439,521078
GN862-200-CPV3-M16009703459,538,551358,5M86,5G1/8439,521078
GN862-200-EPV3-M1600970-59,538,55135-M86,5G1/8439,521078
GN862-300-APV3240010504268,55360,55010,3M108,5G1/4650,5258108
GN862-300-CPV3240010504268,55360,55010,3M108,5G1/4650,5258108
GN862-300-EPV324001050-68,55360,550-M108,5G1/4650,5258108
GN862-300-APV3-M240010504268,55360,55010,3M108,5G1/4650,5258108
GN862-300-CPV3-M240010504268,55360,55010,3M108,5G1/4650,5258108
GN862-300-EPV3-M24001050-68,55360,550-M108,5G1/4650,5258108
Modelh3h4h4l1l2l3
max
l4m1m2m3m4m5r≈swWeight
[g]
GN862-200-APV317--15059--2614,516111698--1147
GN862-200-CPV317355415059-682614,516111698-211147
GN862-200-EPV317--150-80-2614,5161116986-1180
GN862-200-APV3-M17--15059--2614,516111698--1100
GN862-200-CPV3-M17355415059-682614,516111698-211147
GN862-200-EPV3-M17--150-80-2614,5161116986-1100
GN862-300-APV320--18774--3016,5281230122--2090
GN862-300-CPV3204179,518774-773016,5281230122-212020
GN862-300-EPV320--187-104-3016,52812301228-2025
GN862-300-APV3-M20--18774--3016,5281230122--2015
GN862-300-CPV3-M204179,518774-773016,5281230122-212100
GN862-300-EPV3-M20--187-104-3016,52812301228-2030

Pneumatically operated clamps heavy duty type with magnetic piston GN 861 (Elesa+Ganter)

Properties and application:

  • Pneumatically operated clamps GN 861 have been constructed in such a way as to make them easily demountable
  • The bearing pins are axially fixed with circlips
  • This allows the clamping arm to be modified to suit any particular application
  • To ensure an extended life of the mechanical parts as well as the air cylinder the operating pressure should not exceed 6 bar
  • In addition a lubro control unit should be fitted in the air line
  • Pneumatically operated clamps GN 861 are also available as version M (magnetic piston). In conjunction with a proximity switch GN 896.3 the piston position is sensed and the generated signal can be used in sequence control systems
  • Type EP: solid clamping arm
  • Coding M: Magnetic piston
  • Elesa+Ganter toggle clamps - operating principle

 

GN 861

Pneumatically operated clamps heavy duty type with magnetic piston GN 861

Characteristics:

  • Body of cast steel, black laquered
  • Other parts made of steel St 60, zinc plated, blue passivated
  • Bearing pins are case hardened
  • Double acting cylinder with adjustable cushioning max. pressure 6 bar
  • All moving parts lubricated with special grease

 

ModelFh
[N]
Fs
[N]
b1b2b3d1d2Inner Ø of hoseh1h2h3
GN 861-1000-EP-M100003200102902010,5G1/481458025
GN 861-2000-EP-M2000038001121002010,5G3/8101709035
Modell1l2l3m1m2m3m4r≈sWeight
[g]
GN 861-1000-EP-M410901556512,56548140135890
GN 861-2000-EP-M48711317670157056172139100

Pneumatic toggle clamps GN 860 (Elesa+Ganter)

Properties and application:

  • The clamping principle of GN 860 pneumatic toggle clamps is identical in construction and dimensions to the manually operated GN 810 vertical toggle clamps
  • To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar
  • GN 860 pneumatic toggle clamps are also available in sizes 200 and up as a version M (magnetic piston)
  • In conjunction with GN 896.1/ GN 896.2 proximity switches, the piston position can be sensed and the generated impulse can be used to transmit an electrical signal
  • Type AP3: U-bar version, with two flanged washers
  • Type CP3: U-bar version, with two flanged washers and GN 708.1 Spindle Assmebly
  • Type EP3: Solid bar version, with clasp
  • Coding M: Magnetic piston from size 200
  • Elesa+Ganter toggle clamps - operating principle

 

GN 860

Pneumatic toggle clamps GN 860

Characteristics:

  • Parts in sheet metal made of case-hardened steel C10, zinc plated, blue passivated
  • Bearing rivets (for size 200 and up), case-hardened
  • Air cylinder bearing pins, case-hardened
  • Double-action air cylinder, maximum pressure 6 bar
  • All moving parts lubricated with special grease

 

ModelFh
[N]
Fs
[N]
ab1b2d1d2d3inner Ø for hoseh1h2h3h4h5l1l2l3
GN 860-70-AP370048020425,5M54,5G1/84512111--1639233
GN 860-70-CP370048020425,5M54,5G1/84512111196,31639233
GN 860-70-EP3700480-42-M54,5G1/8451,52111--16392-
GN 860-125-AP316006002847,56,5M65,5G1/8470,53014--200,515040
GN 860-125-CP316006002847,56,5M65,5G1/8470,5301423,513,5200,515040
GN 860-125-EP31600600-47,5-M65,5G1/8470,53014--200,5150-
GN 860-200-AP3220080040538,5M86,5G1/84793618--24716059
GN 860-200-AP3-M220048040538,5M86,5G1/84793618--24716059
GN 860-200-CP3220080040538,5M86,5G1/847936183012,524716059
GN 860-200-CP3-M220048040538,5M86,5G1/847936183012,524716059
GN 860-200-EP32200800-53-M86,5G1/84793618--247160-
GN 860-200-EP3-M2200480-53-M86,5G1/84793618--247160-
GN 860-300-AP327001300427410,5M108,5G1/46984820--305195,566
GN 860-300-AP3-M2700600427410,5M108,5G1/46984820--305195,566
GN 860-300-CP327001300427410,5M108,5G1/469848203520305195,566
GN 860-300-CP3-M2700600427410,5M108,5G1/469848203520305195,566
GN 860-300-EP327001300-74-M108,5G1/46984820--305195,5-
GN 860-300-EP3-M2700600-74-M108,5G1/46984820--305195,5-
GN 860-400-AP330001350667412,5M128,5G1/48107,55122--36121694
GN 860-400-AP3-M3000800667412,5M128,5G1/48107,55122--36121694
GN 860-400-CP330001350667412,5M128,5G1/48107,551223918,536121694
GN 860-400-CP3-M3000800667412,5M128,5G1/48107,551223918,536121694
GN 860-400-EP330001350-74-M128,5G1/48107,55122--361216-
GN 860-400-EP3-M3000800-74-M128,5G1/48107,55122--361216-
Modell4l4 maxm1
±0,01
m1m2m3
±0,01
m3m4
±0,01
m4m5
±0,01
m5m6r≈rswWeight
[g]
GN 860-70-AP3---247-15-24-6,51662,5---499
GN 860-70-CP3---247-15-24-6,51662,5--15500
GN 860-70-EP3-41-247-15-24-6,51662,5-4-505
GN 860-125-AP3---2711,25-12,5-29-81979---727
GN 860-125-CP3---2711,25-12,5-29-81979--19,5700
GN 860-125-EP3-54-2711,25-12,5-29-81979-5-723
GN 860-200-AP3---3212-19-32-11,520104---1220
GN 860-200-AP3-M---3212-19-32-11,520104---1225
GN 860-200-CP3---3212-19-32-11,520104--201220
GN 860-200-CP3-M---3212-19-32-11,520104--201250
GN 860-200-EP3-75-3212-19-32-11,520104-6-1225
GN 860-200-EP3-M-75-3212-19-32-11,520104-6-1245
GN 860-300-AP3---4510,5-29-46-8,532122---2155
GN 860-300-AP3-M---4510,5-29-46-8,532122---2148
GN 860-300-CP3---4510,5-29-46-8,532122--212200
GN 860-300-CP3-M---4510,5-29-46-8,532122--212218
GN 860-300-EP3-85-4510,5-29-46-8,532122-8-2350
GN 860-300-EP3-M-85-4510,5-29-46-8,532122-8-2160
GN 860-400-AP3---4510-32-45-1032156---3265
GN 860-400-AP3-M---4510-32-45-1032156---3235
GN 860-400-CP3---4510-32-45-1032156--373376
GN 860-400-CP3-M---4510-32-45-1032156--373346
GN 860-400-EP3-120-4510-32-45-1032156-10-3250
GN 860-400-EP3-M-120-4510-32-45-1032156-10-3226

C-Clamps GN 855 (Elesa+Ganter)

Properties and Application:

  • C-Clamps GN 855 feature an especially robust, sturdy and compact design, allowing them to be used under severe and demanding conditions, e.g. higher temperatures, dust, mist, etc.
  • The C-Clamps are normally installed and fixed at the clamping point
  • The counter plate supplied loose has a ball socket and is designed for attaching to the counter piece to be clamped
  • In connection with the ball-type bolt, this configuration ensure the precise positioning of the latch clamp
  • If the counter plate is not to remain at the counter piece to be clamped, the clamping bracket may alternatively also be used to hold GN 802 clamping bolts which have a pendulum-type bearing surface
  • Type C2: for screwing
  • Elesa+Ganter toggle clamps - operating principle

 

GN 855

C-Clamps GN 855

Characteristics:

  • Clamp and operating handle made of steel, forged and blackened
  • Bearing flange made of sheet steel, blackened
  • Clamping bolt and nut made of steel, blackened
  • Counter plate and bearing pin made of steel, blackened

 

Modelh1
max
l1Fh
[N]
b1b2d1d2h2h3h4l2l3l4l5l6mw1w2Weight
[g]
GN 855-40-32-C2 40 32 15000 60 26 M10 8,5 111 168 129 30 18 72 168 173 45 19 32 1000
GN 855-75-32-C2 75 32 15000 60 26 M10 8,5 146 168 164 30 18 72 168 207 45 19 32 1201

We have 27 guests and no members online

fundusze unia stopka