Darmet Białystok Darmet Białystok

Our adress:

Darmet sp. z o.o.
Zakład Obróbki Skrawaniem
Komunalna 4c street, 15-197 Białystok

Our e-mail:

handel@darmet.com.pl

Telephone number:

+48 85 664 75 34

Horizontal acting toggle clamps with vertical mounting base GN 820.2 (Elesa+Ganter)

Properties and application:

  • GN 820.2 horizontal acting toggle clamps work according to the toggle principle: lever and clamping bar move in the opposite direction
  • They require less space for the clamping action
  • In the clamped position the operating lever is in its horizontal position
  • The 90° rotated mounting surface allows a space-saving installation in addition to the clamping point
  • Horizontal acting toggle clamps in the U-bar version with two flanged washers (Type MF) can accommodate an application specific clamping screw
  • A spindle assembly with neoprene rubber tip is also included for Type MFC
  • Type MF: U-bar version, with two flanged washers
  • Type MFC: U-bar version, with two flanged washers and GN 708,1 Spindle Assembly
  • Elesa+Ganter toggle clamps - operating principle

 

GN 820.2
version in steel

GN 820.2-NI
version in stainless steel

 

GN 820.2 - version in steel
Horizontal acting toggle clamps with vertical mounting base GN 820.2 - version in steel

Characteristics:

  • Case-hardened Steel C10, zinc plated, blue-passivated
  • Bearing pins tempered
  • Bearing rivets (for size 355 and up), case-hardened
  • All moving parts lubricated with special grease

Hand grip:

  • High quality, oil resistant red plastic

Spindle assembly GN 708.1 (Type A):

  • Steel, zinc plated
  • Rubber tip 85 Shore A

 

ModelFH
[N]		a≈b1b2b3d1d2h1h2h3h4h5l1l2l3l4m1m2m3rswWeight
[g]
GN820.2-75-MF 900 20 30 25,5 5,5 M5 4,5 62 39 11 - - 118 30 72 - 18 13,5 6 42,5 2 - 105
GN820.2-75-MFC 900 20 30 25,5 5,5 M5 4,5 62 39 11 19 30 118 30 72 45 18 13,5 6 42,5 2 15 128
GN820.2-130-MF 1000 32 39 35 6,5 M6 5,5 85 58,5 14 - - 170 45 95 - 26 22 6,5 61 2,5 - 240
GN820.2-130-MFC 1000 32 39 35 6,5 M6 5,5 85 58,5 14 25,5 48,5 170 45 95 55 26 22 6,5 61 2,5 17,5 260
GN820.2-230-MF 1700 37 43 40 8,5 M8 6,5 102 69 18 - - 195 52 113 - 28,5 24 8 70 3 - 400
GN820.2-230-MFC 1700 37 43 40 8,5 M8 6,5 102 69 18 30 53 195 52 113 68 28,5 24 8 70 3 20 420
GN820.2-355-MF 1800 58 52 52 10,5 M10 8,5 135 92 22 - - 270 85 166 - 32 32 10 108,5 3,5 - 840
GN820.2-355-MFC 1800 58 52 52 10,5 M10 8,5 135 92 22 37 75,5 270 85 166 77 32 32 10 108,5 3,5 19 900

 

GN 820.2-NI - version in stainless steel
Horizontal acting toggle clamps with vertical mounting base GN 820.2-NI - version in stainless steel

Characteristics:

  • Stainless Steel AISI 304 NI
  • All moving parts lubricated with special grease

Hand grip:

  • High quality, oil resistant red plastic

Spindle assembly GN 708,1 (Type A):

  • Stainless Steel, AISI 304
  • Rubber tip 85 Shore A

 

ModelFH
[N]		a≈b1b2b3d1d2h1h2h3h4h5l1l2l3l4m1m2m3rswWeight
[g]
GN820.2-75-MF-NI 900 20 30 25,5 5,5 M5 4,5 62 39 11 - - 118 30 72 - 18 13,5 6 42,5 2 - 105
GN820.2-75-MFC-NI 900 20 30 25,5 5,5 M5 4,5 62 39 11 19 30 118 30 72 45 18 13,5 6 42,5 2 15 110
GN820.2-130-MF-NI 1000 32 39 35 6,5 M6 5,5 85 58,5 14 - - 170 45 95 - 26 22 6,5 61 2,5 - 210
GN820.2-130-MFC-NI 1000 32 39 35 6,5 M6 5,5 85 58,5 14 25,5 48,5 170 45 95 55 26 22 6,5 61 2,5 17,5 240
GN820.2-230-MF-NI 1700 37 43 40 8,5 M8 6,5 102 69 18 - - 195 52 113 - 28,5 24 8 70 3 - 400
GN820.2-230-MFC-NI 1700 37 43 40 8,5 M8 6,5 102 69 18 30 53 195 52 113 68 28,5 24 8 70 3 20 410

Horizontal acting toggle clamps with vertical mounting base GN 820.1 (Elesa+Ganter)

Properties and application:

  • GN 820.1 horizontal acting toggle clamps work according to the toggle principle: lever and clamping bar move in the opposite direction
  • They require less space for the clamping action. In the clamped position the operating lever is in its horizontal position
  • Horizontal acting toggle clamps in the U-bar version with two flanged washers (Type N) can accommodate an application specific clamping screw
  • A spindle assembly with neoprene rubber tip is also included for Type NC
  • Type N: U-bar version, with two flanged washers
  • Type NC: U-bar version, with two flanged washers and GN 708.1 Spindle Assembly
  • Type P: Solid bar version with clasp
  • Elesa+Ganter toggle clamps - operating principle

 

GN 820.1
version in steel

GN 820.1-NI
version in stainless steel

 

GN 820.1 - version in steel
Horizontal acting toggle clamps with vertical mounting base GN 820.1 - wersja ze stali

Characteristics:

  • Case-hardened Steel C10, zinc plated, blue-passivated
  • Bearing pins tempered
  • Bearing rivets (for size 355 and up), case-hardened
  • All moving parts lubricated with special grease

Hand grip:

  • High quality, oil resistant red plastic

Spindle assembly GN 708.1 (Type A):

  • Steel, zinc plated
  • Rubber tip 85 Shore A

 
ModelFH
[N]		a≈b1b2b3b4d1d2h1≈h2h3h4l1≈l2≈l3≈l4
max		l5m1m2m3r≈swWeight
[g]
GN820.1-75-P 900 - 28 8 4 - M5 4,5 45,5 27,5 11 - 118 68 - 49,5 - 13,5 3,5 5 43 4 - 90
GN820.1-75-NC 900 20 28 8 4 5,5 M5 4,5 45,5 27,5 11 22,5 118 68 40 - 45 13,5 3,5 5 43 - 15 90
GN820.1-75-N 900 20 28 8 4 5,5 M5 4,5 45,5 27,5 11 22,5 118 68 40 - - 13,5 3,5 5 43 - - 90
GN820.1-130-P 1000 - 36 10 5 - M6 5,5 64 43 16 - 170 92 - 64 - 26 5,8 8,8 62 5 - 210
GN820.1-130-NC 1000 32 36 10 5 6,5 M6 5,5 64 43 16 27 170 92 53 - 55 26 5,8 8,8 62 - 17,5 250
GN820.1-130-N 1000 32 36 10 5 6,5 M6 5,5 64 43 16 27 170 92 53 - - 26 5,8 8,8 62 - - 200
GN820.1-230-P 1700 - 44 12 6 - M8 6,5 75 50 18 - 196 109 - 78 - 26 6,5 9 73 6 - 340
GN820.1-230-NC 1700 37 44 12 6 8,5 M8 6,5 75 50 18 35 196 109 63,5 - 68 26 6,5 9 73 - 20 370
GN820.1-230-N 1700 37 44 12 6 8,5 M8 6,5 75 50 18 35 196 109 63,5 - - 26 6,5 9 73 - - 330
GN820.1-355-P 1800 - 60 14 7 - M10 8,5 102 69 22 - 270 161 - 115 - 41 7,5 9,6 110 7 - 720
GN820.1-355-NC 1800 58 60 14 7 10,4 M10 8,5 102 69 22 43 270 161 96 - 77 41 7,5 9,6 110 - 19 770
GN820.1-355-N 1800 58 60 14 7 10,4 M1 8,5 102 69 22 43 270 161 96 - - 41 7,5 9,6 110 - - 700
GN820.1-455-P 3200 - 70 18 10 - M12 8,5 119 80,5 26 - 309 186 - 135 - 41,5 11 12,5 128 10 - 1230
GN820.1-455-NC 3200 65 70 18 10 12,4 M12 8,5 119 80,5 26 53 309 186 116 - 100 41,5 11 12,5 128 - 33 1311
GN820.1-455-N 3200 65 70 18 10 12,4 M12 8,5 119 80,5 26 53 309 186 116 - - 41,5 11 12,5 128 - - 1200

 

GN 820.1-NI - version in stainless steel
Horizontal acting toggle clamps with vertical mounting base GN 820.1-NI - version in stainless steel

Characteristics:

  • Stainless Steel AISI 304 NI
  • All moving parts lubricated with special grease

Hand grip:

  • High quality, oil resistant red plastic

Spindle assembly GN 708,1 (Type A):

  • Stainless Steel, AISI 304
  • Rubber tip 85 Shore A

 
ModelFH
[N]		a≈b1b2b3b4d1d2h1≈h2h3h4l1≈l2≈l3≈l4
max		l5m1m2m3r≈swWeight
[g]
GN820.1-75-P-NI 900 - 28 8 4 - M5 4,5 45,5 27,5 11 - 118 68 - 49,5 - 13,5 3,5 5 43 4 - 90
GN820.1-75-NC-NI 900 20 28 8 4 5,5 M5 4,5 45,5 27,5 11 22,5 118 68 40 - 45 13,5 3,5 5 43 - 15 90
GN820.1-75-N-NI 900 20 28 8 4 5,5 M5 4,5 45,5 27,5 11 22,5 118 68 40 - - 13,5 3,5 5 43 - - 93
GN820.1-130-P-NI 1000 - 36 10 5 - M6 5,5 64 43 16 - 170 92 - 64 - 26 5,8 8,8 62 5 - 200
GN820.1-130-NC-NI 1000 32 36 10 5 6,5 M6 5,5 64 43 16 27 170 92 53 - 55 26 5,8 8,8 62 - 17,5 217
GN820.1-130-N-NI 1000 32 36 10 5 6,5 M6 5,5 64 43 16 27 170 92 53 - - 26 5,8 8,8 62 - - 210
GN820.1-230-P-NI 1700 - 44 12 6 - M8 6,5 75 50 18 - 196 109 - 78 - 26 6,5 9 73 6 - 330
GN820.1-230-NC-NI 1700 37 44 12 6 8,5 M8 6,5 75 50 18 35 196 109 63,5 - 68 26 6,5 9 73 - 20 400
GN820.1-230-N-NI 1700 37 44 12 6 8,5 M8 6,5 75 50 18 35 196 109 63,5 - - 26 6,5 9 73 - - 340

Horizontal acting toggle clamps with horizontal mounting base GN 820 (Elesa+Ganter)

Properties and application:

  • GN 820 horizontal acting toggle clamps work according to the toggle principle: lever and clamping bar move in the opposite direction
  • They require less space for the clamping action. In the clamped position the operating lever is in its horizontal position
  • Horizontal acting toggle clamps in the U-bar version with two flanged washers (Type M) can accommodate an application specific clamping screw
  • A spindle assembly with neoprene rubber tip is also included for Type MC
  • Type M: U-bar version, with two flanged washers
  • Type MC: U-bar version, with two flanged washers and GN 708.1 Spindle Assembly
  • Type O: Solid bar versin, with clasp
  • Elesa+Ganter toggle clamps - operating principle

 

GN 820
version in steel

GN 820-NI
version in stainless steel

 

GN 820 - version in steel
Horizontal acting toggle clamps with horizontal mounting base GN 820 - version in steel

Characteristics:

  • Case-hardened Steel C10, zinc plated, blue-passivated
  • Bearing pins tempered
  • Bearing rivets (for size 355 and up), case-hardened
  • All moving parts lubricated with special grease

Hand grip:

  • High quality, oil resistant red plastic

Spindle assembly GN 708.1 (Type A):

  • Steel, zinc plated
  • Rubber tip 85 Shore A

 
ModelFH
[N]		a≈b1b2b3d1d2h1≈h2h3h4h5l1≈l2≈l3≈l4
max		l5m1m2m3s1s2Weight
[g]
GN820-25-M 400 10 24 24,5 4,5 M4 4,3 23 12 7 - - 69 43 20 - - 15 16 16 1,2 - 25
GN820-75-O 900 - 28 26 - M5 4,5 37 20 11 - - 118 67 - 49,5 - 13,5 16 19 2 4 90
GN820-75-MC 900 20 28 26 5,5 M5 4,5 37 20 11 19 5 118 67 40 - 45 13,5 16 19 2 - 100
GN820-75-M 900 20 28 26 5,5 M5 4,5 37 20 11 - - 118 67 40 - - 13,5 16 19 2 - 85
GN820-130-O 1000 - 36 40 - M6 5,5 51 30,5 16 - - 168 92 - 64 - 26 22,4 28,4 2,5 5 200
GN820-130-MC 1000 32 36 40 6,5 M6 5,5 51 30,5 16 25,5 14 168 92 53 - 55 26 22,4 28,4 2,5 - 190
GN820-130-M 1000 32 36 40 6,5 M6 5,5 51 30,5 16 - - 168 92 53 - - 26 22,4 28,4 2,5 - 203
GN820-230-O 1700 - 44 42 - M8 6,5 61,5 36,5 18 - - 196 110 - 78 - 26 26 31,5 3 6 340
GN820-230-MC 1700 37 44 42 8,5 M8 6,5 61,5 36,5 18 30 12,5 196 110 63,5 - 68 26 26 31,5 3 - 350
GN820-230-M 1700 37 44 42 8,5 M8 6,5 61,5 36,5 18 - - 196 110 63,5 - - 26 26 31,5 3 - 329
GN820-355-O 1800 - 60 56 - M10 8,5 83 50 22 - - 270 161 - 115 - 41 38,8 43 3,5 7 717
GN820-355-MC 1800 58 60 56 10,5 M10 8,5 83 50 22 37 23,5 270 161 96 - 77 41 38,8 43 3,5 - 780
GN820-355-M 1800 58 60 56 10,5 M10 8,5 83 50 22 - - 270 161 96 - - 41 38,8 43 3,5 - 700
GN820-455-O 3200 - 70 65 - M12 8,5 98,5 60 26 - - 309 186 - 135 - 41,5 40 43 4 10 1200
GN820-455-MC 3200 65 70 65 13 M12 8,5 98,5 60 26 43 27,5 309 186 116 - 100 41,5 40 43 4 - 1320
GN820-455-M 3200 65 70 65 13 M12 8,5 98,5 60 26 - - 309 186 116 - - 41,5 40 43 4 - 1200

 

GN 820-NI - version in stainless steel
Horizontal acting toggle clamps with horizontal mounting base GN 820-NI - version in stainless steel

Characteristics:

  • Stainless Steel AISI 304 NI
  • All moving parts lubricated with special grease

Hand grip:

  • High quality, oil resistant red plastic

Spindle assembly GN 708,1 (Type A):

  • Stainless Steel, AISI 304
  • Rubber tip 85 Shore A

 
ModelFH
[N]		a≈b1b2b3d1d2h1≈h2h3h4h5l1≈l2≈l3≈l4
max		l5m1m2m3s1s2Weight
[g]
GN820-25-M-NI 400 10 24 24,5 4,5 M4 4,3 23 12 7 - - 69 43 20 - - 15 16 16 1,2 - 20
GN820-75-O-NI 900 - 28 26 - M5 4,5 37 20 11 - - 118 67 - 49,5 - 13,5 16 19 2 4 90
GN820-75-MC-NI 900 20 28 26 5,5 M5 4,5 37 20 11 19 5 118 67 40 - 45 13,5 16 19 2 - 80
GN820-75-M-NI 900 20 28 26 5,5 M5 4,5 37 20 11 - - 118 67 40 - - 13,5 16 19 2 - 80
GN820-130-O-NI 1000 - 36 40 - M6 5,5 51 30,5 16 - - 168 92 - 64 - 26 22,4 28,4 2,5 5 211
GN820-130-MC-NI 1000 32 36 40 6,5 M6 5,5 51 30,5 16 25,5 14 168 92 53 - 55 26 22,4 28,4 2,5 - 202
GN820-130-M-NI 1000 32 36 40 6,5 M6 5,5 51 30,5 16 - - 168 92 53 - - 26 22,4 28,4 2,5 - 202
GN820-230-O-NI 1700 - 44 42 - M8 6,5 61,5 36,5 18 - - 196 110 - 78 - 26 26 31,5 3 6 340
GN820-230-MC-NI 1700 37 44 42 8,5 M8 6,5 61,5 36,5 18 30 12,5 196 110 63,5 - 68 26 26 31,5 3 - 360
GN820-230-M-NI 1700 37 44 42 8,5 M8 6,5 61,5 36,5 18 - - 196 110 63,5 - - 26 26 31,5 3 - 330

Vertical clamps, heavy duty type GN 813 (Elesa+Ganter)

Properties and application:

  • Vertical clamps GN 813 are used for applications where a very high holding force is required such as closing of foam moulds
  • These clamps have been designed for easy dismantling: i.e. the bearing pins are locked with circlips
  • After dismantling the individual parts, they can be modified to suit individual applications
  • Typ F: solid clamping arm
  • Elesa+Ganter toggle clamps - operating principle

 

GN 813
Vertical clamps, heavy duty type GN 818 (Elesa+Ganter)

Characteristics:

  • Clamping arm, bearing pins made of steel St 60, blackened
  • Other parts made of steel St 37, weldable, blackened
  • Bearing pins / bearing rivets case hardened
  • All moving parts lubricated with special grease

Handle grip:

  • Solid moulded plastic handle sleeve, red, oil resistant

 

ModelFH
[N]		b1b2b3b4eh1h2h3l1l2rWeight
[g]
GN813-1000-F 10000 80 36 20 20 67 265 55 25 190 110 177 2400
GN813-2000-F 20000 100 36 20 20 82 297 65 35 220 120 202 3600
GN813-3000-F 30000 110 45 25 25 90 320 80 40 250 140 230 5700

Vertical acting toggle clamps with dual flanged mounting base GN 812 (Elesa+Ganter)

Properties and application:

  • GN 812 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction
  • They can be mounted in two planes via the dual flanged mounting base and require less space for the clamping action because the clamping arm and the operating lever move in opposite directions
  • Vertical acting toggle clamps in the U-bar version with two flanged washers (Type AV) can accommodate an application specific clamping screw
  • A spindle assembly with neoprene rubber tip is also included for Type CV
  • Type EV version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place
  • Type AV: U-bar version, with two flanged washers
  • Type CV: U-bar version, with two flanged washers and GN 708.1 Spindle Assembly
  • Type EV: Solid bar version, with clasp
  • Elesa+Ganter toggle clamps - operating principle

 

GN 812 - version in sheet metal
Vertical acting toggle clamps with dual flanged mounting base GN 812

Characteristics:

  • Parts in sheet metal
  • Case hardening steel C10, zinc plated, blue passivated
  • Bearing pins tempered
  • Bearing rivets case-hardened
  • All moving parts lubricated with special grease

Hand grip:

  • High quality, oil resistant red plastic

Spindle assmebly GN 708.1 (Type A):

  • Steel, zinc plated
  • Rubber tip 85 Shore A

 
ModelFH
[N]		a≈b1b2b3b4d1d2eh1≈h2h3h4h5
GN812-200-AV 1200 34 35 38 35 8,5 M8 6,5 37 154 76 17 - -
GN812-200-CV 1200 34 35 38 35 8,5 M8 6,5 37 154 76 17 34 52
GN812-200-EV 1200 - 35 38 35 8,5 M8 6,5 37 154 76 17 - -
GN812-300-AV 1900 42 48 48 51 10,4 M10 8,5 46 198 108 20 - -
GN812-300-CV 1900 42 48 48 51 10,4 M10 8,5 46 198 108 20 41 79,5
GN812-300-EV 1900 - 48 48 51 10,4 M10 8,5 46 198 108 20 - -
Modell1≈l2≈l3
max		l4m1m2m3m4m5r≈s1s2wWeight
[g]
GN812-200-AV 158 59 - - 16 26 11 16 11 97 3 - - 420
GN812-200-CV 158 59 - 68 16 26 11 16 11 97 3 - 21 480
GN812-200-EV 158 - 76 - 16 26 11 16 11 97 3 6 - 420
GN812-300-AV 194 74 - - 28 30 11,5 30 12 122 3 - - 800
GN812-300-CV 194 74 - 77 28 30 11,5 30 12 122 3 - 21 880
GN812-300-EV 194 - 95 - 28 30 11,5 30 12 122 3 8 - 800

More Articles …

  1. Vertical acting toggle clamps with vertical mounting base GN 810.1 (Elesa+Ganter)
  2. Vertical acting toggle clamps with horizontal mounting base GN 810 (Elesa+Ganter)

Page 4 of 5

Main Menu

Categories

logo darmet