Power Tools
| Safety | Operating voltage |
|---|---|
| SPARKY Power Tools comply with the safety requirements as provided in Directives 2006/42/EC. 2014/35/EU and their harmonized safety standards EN 60745, EN 60335. | SPARKY Power Tools are designed for single-phase operating voltage 110 V and 230 V and frequency 50 Hz. |
| Double insulations | Certificates |
| SPARKY Power Tools are protectively insulated according to the requirements of EN 60745 and are marked accordingly with the double square safety mark. Double insulation provides electric shock protection through two separate levels of insulation ? the non-conducting housing material and a second level of insulation for all internal electric components. Double insulated Power Tools do not require earthing. | All SPARKY Power Tools have been evaluated for conformity according to: EU Directives 2006/42/EC, 2014/30/EU, 2014/35/ EU by leading certification Authorities or have been tested by accredited technical laboratories for conformance with the regulations of EN 60745, EN 60335, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 standards. Our in-house technical laboratory is accredited and complies with the standards defined in ISO / IEC 17025:2005. |
| Radio interference | Original instructions |
| SPARKY Power Tools are radio suppressed under directive 2014/30/EU and European Standards EN 55014-1, EN 55014-2, EN 61000-2-3, EN 61000-3-3. | Each SPARKY Power tool is supplied together with multilingual Original and Safety instructions. Please read, understand and follow the instructions for your safety, best care and performanc?. |
| Weight | Disclaimer |
| All weights according to EPTA-Procedure 01/2014. - without cable/cord - with all standard equipment necessary for normal use as auxiliary handles, guards, drill chuck, flanges etc. - without optional equipment as drill bits, discs, chisels etc. - cordless tools with battery |
We reserve the right to make changes or improvements to our products without incurring an additional obligation. This includes any obligation to make corresponding changes or improvements in products previously manufactured or sold. E & O E. |
Symbols
|
|
Double insulation |
|
Class I electrical appliance with protection against electric shock ? connected to earth |
|
|
Electronic speed pre-selection |
|
Constant electronics plus electronic speed pre-selection |
|
|
Constant electronics plus variable speed control switch |
|
Electronic speed pre-selection, constant electronics, torque control |
|
|
Forward / reverse action |
|
Electronics for soft start and restriction of starting current |
|
|
Two-speed gears |
|
Three-speed gears |
|
|
Thermal overload protection |
|
Safety upon mains drop-out |
|
|
Protective clutch |  |
Spindle lock |
 |
Pendulum action |  |
Bevel cutting |
 |
Connection to vacuum cleaner |  |
Hook & loop fastening |
|
|
Auto-stop brushes |
|
Anti-vibration system |
|
|
Laser line generator |
|
PRCD ? Portable residual current circuit breaker with no-volt release |
|
|
Tool case |
|
?ains cable length |
|
|
Drilling / Chiselling in Concrete |
|
Drilling / Chiselling in Masonry |
|
|
Drilling in Metal |
|
Drilling in Wood |
|
|
Impact Drilling |
|
Core cutter |
|
|
SDS Max Device |
|
SDS+ Device |
|
|
Concrete |
|
Masonry |
|
|
Stone |
|
Marble |
|
|
Metal |
|
Steel |
|
|
Aluminium |
|
Non-ferrous metals |
|
|
Stainless steel |
|
Laminate |
|
|
Parquet |
|
Veneer |
|
|
Ceramic |
|
Glass |
|
|
Fiberglass |
|
Plexsiglass |
|
|
PVC |
|
Epoxy resin |
