Properties and applications:
- Carbide insert, grade PL 05, PVD coating (TiAlN)
- 90° milling
- Technical information on DARMET inserts
Specifications:
 |
||
| Insert shape and angle | ||
|---|---|---|
| A | 85° |  |
| Normal clearance angle | ||
| P | 11° |  |
| Tolerance class | ||
| G | l ? 0,08 m ? 0,013 s ? 0,025 |
 |
| Chipbreaker and clamping type | ||
| T |  |
|
| Operations | ||
|---|---|---|
 |
 |
 |
| Slotting | Shoulder milling | Surfacing |
| Designation | Grade | l | s | P/r | D | Cutting direction |
|---|---|---|---|---|---|---|
| APGT 1003 PDER ALU | PL 05 | 10 | 3,18 | 90° | 15° | right |
| APGT 1604 PDER ALU | PL 05 | 16 | 4,76 | 90° | 15° | right |
| APGT 1003 PDER ALU | ||||||||
|---|---|---|---|---|---|---|---|---|
| Aluminium | Group number | Brinell hardness [HB] | ap [mm] | Feed [mm/turn] | Vc [m/min] | |||
| min | max | min | max | min | max | |||
| Si < 4% | 13 | - | 0,3 | 9,0 | 0,12 | 0,20 | 400 | 1200 |
| 4% < Si < 8% | 13 | - | 0,10 | 0,18 | 250 | 600 | ||
| Si > 8% | 14 | - | Recommended to use APLX 1003 PDTR insert. | |||||
| For aluminium with high content of silicon it is recommended to use APLX 1003 PDTR insert with cutting conditions shown below. | ||||||||
| Si > 8% | 14 | - | 0,5 | 9,0 | 0,08 | 0,20 | 200 | 400 |
| APGT 1604 PDER ALU | ||||||||
|---|---|---|---|---|---|---|---|---|
| Aluminium | Group number | Brinell hardness [HB] | ap [mm] | Feed [mm/turn] | Vc [m/min] | |||
| min | max | min | max | min | max | |||
| Si < 4% | 13 | - | 0,5 | 15,5 | 0,15 | 0,32 | 400 | 1200 |
| 4% < Si < 8% | 13 | - | 0,12 | 0,25 | 250 | 600 | ||
| Si > 8% | 14 | - | Recommended to use SEKT 1204 AFTN insert. | |||||
| For aluminium with high content of silicon it is recommended to use SEKT 1204 AFTN insert with cutting conditions shown below. | ||||||||
| Si > 8% | 14 | - | 0,5 | 16,0 | 0,15 | 0,25 | 200 | 400 |